File Size
Datasheet 322.43KB Download
Installation Instructions 322.53KB Download
  • RGB LED PWM control Signal Amplifier – Used to extend the range and synchronize multiple LED strip to a single LED Controller, i.e. EV-RGBCTRL-4A
  • Receives PWM signals from the controller, and synchronizes and amplifies.
  • Many EV-RGBAMP-WP4A may be connected to a single Controller
  • Used to amplify any 12V or 24V LED PWM signal up to 4A per ch (3 channels)
  • 12V DC (or 24V) driver required to power this amplifier, dependant on LED strip wattage
  • Max power Controlled 144W @ 12V (CMOS open drain, Common Anode)
  • Dimensions: 3.74”L x 2.09”W x 1.22”H (95L x 53W x 31H mm)
  • Static Power consumption: <1W (Needs an external 12V source)
  • 145g / 0.32lb
  • Working temp -20C to +60C
  • 1 year warranty
Voltage / Power
Input Voltage 12-24V DC
Output Voltage 12-24V DC
Constant Current / Voltage Constant Voltage
Wattage 144W
Output Current 4A/ch
General
IP Rated IP67 No Dust / Water to 3.3ft
Cable Included Yes
Wiring (Series / Parallel) Parallel
Location Outdoor
Material Plastic
Fixing Wall
Dimensions
Length 3.78"
Width 2.09"
Height 1.22"
Warranty
1 yr.

12V / 24V RGB 4A Signal Amplifier Range Extender Waterproof IP67

  • Brand: illuminous
  • Product Code: EV-RGBAMP-WP4A
  • Availability: Out Of Stock
  • $8.49